3D model low-poly NSB Stadler Flirt | CGTrader 3D model low-poly NSB Stadler Flirt | CGTrader

Stadler flirt h0nda, references

The trains can be ordered with two to six sections and are available for all commonly used power system AC and DC as well as standard- and broad gauge. Unauthorized access is thus denied during cleaning, maintenance or repair work. The units will also receive the blue and white colour scheme.

All 25 units have been leased to Eurobahn who uses them on the Hellweg network in North Rhine-Westphalia. Their fleet consists of 14 three-car and 6 four-car units.

Mounting of the timetable holder is easy, because it fits in the same panel cutout as used for the P Series toggle switch. Acceleration also varies between 0. Starting in Decemberthe trains will be put on the Frankfurt — Koblenz route.

Terms and Condition

They ensure that the contacts will open even if they have become welded together due to a short-circuit. Stadler flirt h0nda 43 four-section units can only be used within Switzerland.

Due to the use of jacobs bogies between the sections the whole trains becomes one single cabin that can be walked through.

On the two-section trains, only one bogie is powered, while on longer versions it is possible to have a third stadler flirt h0nda bogie in the middle currently only the trains for NSB. Master controller The S C from Schaltbau is a versatile handy master controller and brake controller especially designed for multiple unit trains.

Emergency brake handle The entrance vestibules of the low-floor EMU are equipped with Schaltbau NBS40 Series emergency brake handles for use of the passengers in case of emergency.

Privacy policy

First two units arrived on 6 December and started their public service on 15 December of the same year. Italy[ edit ] ETR unit in Italy. The floor height at the entrances can be chosen by the operator, providing level boarding at most stations. It has become a favourite among railway operators all over Europe.

Twenty-six units will be used on the Oslo Commuter Rail and the remaining 24 units will be used on regional and express routes. You can see the master controller, three toggle switch consoles and a timetable holder in the centre of the desk integrated in a large toggle switch console.

The 19 units of this type already delivered are four-sections long, the eleven units ordered in August are six-section trains and are additionally equipped with the ETCS Level 2 train control system. Automatic door control Schaltbau S Series snap-action switches are used for automatic door control.

In addition to that you will find snap-action switches for automatic door control and emergency brake hanldles from Schaltbau in the entrance vestibules of the multiple unit train. In Italy FLIRT are used by six regional railways, in total units ordered and built are so divided among the following companies: During the remainder of on and for most of the Sm5 units were extensively tested in different parts of Finland.

The toggle switches come as 3 or 5 position contact assemblies. In Germany 3 and 4 car configurations are used for regional transit.

Translation

Starting in Decemberthe trains will be put on the Frankfurt — Koblenz route. The first vehicle was delivered in for the use on the Stadtbahn Zug. In DB Regioa subsidiary of Deutsche Bahn ordered five five-section vehicles for regional services on the German east coast. The first 19 units of this type to be delivered were four-sections long, and were followed by eleven units ordered that six-sections long and are additionally equipped with the ETCS Level 2 train control system.

The following pictures are close-ups of the Schaltbau components. Their fleet consists of 14 three-car and 6 four-car units.

Stadler Flirt - Introduction on Vimeo

Automatic couplers at both ends of the train allow up to four trains to be connected and disconnected quickly. The first unit arrived on 11 September [42] These four section units have the same blue and white colour scheme with yellow doors which is the same as the orders livery.

Each bogie usually has a continuous power rating of kW giving a typical four-section train kW total power output as well as maximum power output of kW over a short time.

Also since December WestfalenBahn uses 14 three-car and 5 five-car trains for trains services in the Teutoburg Forest region. They also consist of four sections and are used on the Basel S-Bahn. Toggle switch assemblies This is a detail shot of a console fitted with F Series toggle swtiches from Schaltbau for the intermittent automatic train running control.

Also since December Westfahlenbahn GmbH uses 14 three-car and 5 five-car trains for trains services in the Teutoburg Forest region.